AddThis Slider

Tuesday, December 18, 2018

This Spray Paint Is a Perfect Match for Delta Champagne Bronze


The plumber was coming to do all the hookups, and I still hadn't found a drinking faucet that matched the shape and finish of our sink faucet, the Delta Trinsic in "champagne bronze." While purchasing the sink on Wayfair, I saw this inexpensive Kingston Brass Continental drinking faucet that matched the shape. I decided to snap it up and just hope for the best with the finishes. When the fixtures came in, however, it was clear they were not even close—golden bronze vs. yellow gold. You won't believe what I did next.


Before: Delta Trinsic, champagne bronze / Kingston Brass Continental, polished brass


I have to confess that I kept putting off dealing with it for a time, because—well, other tiny emergencies, such as the electrical panel nightmare, kept getting in the way. But the longer I sat with the clash of the metals, the more it bothered me.

I'm mixing metal finishes in this kitchen—mainly chrome and brass. While most of the appliances are hidden behind panels, there's a bit of chrome trim on the wall ovens and a bit more in the adjoining rooms, like in the dining chair legs and light-switch plates. And there's brass throughout the house in the original brass doorknobs—one of the few remaining original details the previous owners left us. But these two faucets will be standing right under custom brass lighting pendants and wall shelf that are natural brass, which will patina over time and look lovely against the backdrop of the dramatic navy-veined Paonazzo slab marble backsplashes. The more I thought about it, the more I realized that the polished gold finish of the drinking faucet would stand out like a sore thumb.

With time closing in and appliance day hookup imminent, I'd pretty well resigned myself to just letting the guys install it—figuring that I could always replace it later as a DIY. But driving by Home Depot that night I had an idea. Why not give spray paint a try? I mean, as long as I'm okay with replacing it later, why not try spray painting it, see how the finish matches, and whether it lasts? The drinking faucet doesn't see much wear and tear actually—only the handle gets touched a lot, and that part is removable with a little elbow wrench, so conceivably I could touch it up as needed. I stopped in at the big box store and picked up Rust-oleum all metal paint and primer in several bronzy-golden finishes.

I know—painting fixtures is definitely risky, but I made sure to follow the golden rules of good painting:

Sanding & Cleaning







Primer & Paint (All in One)









To make matters even more complicated, I was painting at the job site, under the dim light of a single bare bulb. I actually had to use my phone flashlight to make sure that I was giving every bit of surface an even spray. In the end, I headed off to bed hoping for the best but not really certain how it would all turn out until morning.

The verdict? The color that I chose—Rust-oleum Universal All Surface Metallic Satin Bronze Spray Paint and Primer in One—turned out to be a perfect match for the Delta champagne bronze finish! And, no, this is not a paid-endorsement.








2 comments:

  1. i'm trying to match and having the hardest time! Does the hot water make the paint peel?

    ReplyDelete
  2. Hi Emily, Heat won't make the paint peel, as the product is primer and paint. But it's very important to sand the entire fixture carefully, roughing up the finish so paint will adhere properly. After you sand, wipe all the sanding dust away using Tack Cloth. Then spray on the primer/paint and let it dry for the amount of time listed on the instructions. If you decide you need another coat, you have to sand and tack cloth again, then apply the second coat. Good luck!

    ReplyDelete